| X320 |
| Key Features |
| • |
IP68 and IP69K rated |
| • |
3 band check weighing |
| • |
Built in checkweigh LEDs |
| • |
Three power options |
| • |
20mm LCD display |
| • |
30,000 divisions @ 20 updates/second |
| • |
rin-LINK connector |
|
 |
|
| Designed and built to last in harsh environments |
The X320 combines innovation in industrial
design and engineering excellence to create an instrument
that is ideal for use in food processing, automotive, chemical
or pharmaceutical applications or applications that require
reliable operation in harsh environmental conditions. |
The food grade, impact resistant composite
alloy housing incorporates a double ‘o’ ring seal
which provides superior performance over traditional stainless
steel enclosures. The X320 is rated to IP69K which is the
industry’s highest environmental protection rating.
It has been designed to withstand cleaning with high pressure
water jets (1400psi) at high temperatures (up to 80°C)
from multiple angles. |
The innovative use of a capacitive keyboard
allows the front panel to be constructed as a single piece.
The X320 keypad senses an operator’s finger, whether
gloved or not, from the inside of the enclosure. There are
no moving parts to wear out, no glue to deteriorate and no
keypad tails to fail due to vibration or corrosion. The strength
of the single front facia increases the durability of the
instrument, protecting the LCD and electronics from external
impacts. |
The X320 indicator builds on Rinstrum’s
already successful R320 IP65 indicator. It provides general
purpose weighing functions and has an integrated check-weigh
function with status LEDs built into the front fascia. |
| Specifications |
|
| Performance |
|
| Resolution |
Up to 30,000 divisions, minimum of 0.25µV/division,
20 updates/second |
| Zero Cancellation |
±2.0mV/V |
| Span Adjustment |
0.1mV/V to 3.0mV/V full scale |
| Excitation |
5V for up to 4 x 350 ohm or 8 x 700 ohm load cells (4
wire or 6 wire + shield) |
| A/D Type |
24 bit Sigma Delta with 8,388,608 internal counts |
| Operating Environment |
Temperature: -10 to +50°C ambient, Humidity: 100%,
Rating: IP68 and IP69K |
| Display |
LED Back LCD with six 20mm high digits with units and
annunciators |
| Setup and Calibration |
Full digital with visual prompting in plain messages |
| Digital Filter |
Sliding window average from 0.1 to 4.0 seconds |
| Zero Range |
Adjustable from ±2% to ±20% of full capacity |
| Power Input |
|
| Standard |
12 to 24VDC, 9.6, 12 and 24V batteries (2.5 VA max)
- ON/OFF key with memory feature |
| Variant - AC |
AC power supply: 110/240VAC |
| Variant - Battery |
12V battery pack (rechargeable NiMH) |
| Features |
|
| Optical Data Communications |
opto-LINK Data Coupling magnetically coupled infra-red
communications
Conversion cables available for RS-232 or USB |
| Correction |
Ten point linearity correction |
| Serial Outputs |
RS-232 automatic transmit, network or printer outputs
Transmission rate: 2400, 4800 or 9600 baud |
| Assignable Function Key |
1 |
| Input/Output |
3 Outputs - isolated transistor drive outputs (400mA
total at 50VDC) |
| Battery backed clock calendar |
Battery life 10 years minimum |
| Functions |
Unit switching, counting, manual hold, peak hold, live
weight and totalising
Check weighing – low, pass, high (3 colour status
high intensity LEDs)
Configurable print format |
| Setpoints |
3 |
| Remote Input - shared with comms port |
1 |
| Case Materials |
PC + Polyester alloy, PBT, Silicon rubber, SS304 stand |
| Packing Weights |
Basic indicator: 2kg |
| Optional Mountings |
Stainless steel desk/wall mount
Stainless steel pole mount |
|
| R320 |
 |
| The R300 series of indicators builds on over 15 years of design
experience to create a series of cost effective reliable products
that are ideal for use in mobile applications such as forklifts,
platforms, inside truck cabs and crane scales, OEM applications.
The R320's combination of features, compact housing and powering
options make it suitable for basic weighing on a scale through
to OEM applications. The unit's software is run from flash memory
and can be upgraded in the field using the rin-link connection.
|
| • |
Programmable function key configured for
any one of the built-in functions (Counting, Manual Hold,
Peak Hold, Live Weight Totalising) |
| • |
Configurable printing combined with the clock calendar
allow for traceable dockets to be printed. |
| • |
Built in RS232 communications port is 15kV protected. |
| • |
Two Isolated setpoint outputs |
| |
| • |
High side driver up to 300mA, allowing
for example, direct connection to PLCs and for external
actuators to be driven directly |
| • |
Basic weight-control or level-control functions. |
|
|
| Versatile powering |
| • |
AC, DC and battery options. |
| • |
Wide DC operation (7 -24V) to suit a variety of onboard
OEM applications. |
| • |
Supports battery packs from 4.8V to 24V. |
| • |
The rechargeable battery version is designed to achieve
maximum time between recharges: |
| |
| • |
Up to 75 hours (single load cell and
no backlight) of continuous operation between charges
depending on configuration |
| • |
Battery charging indication on charger |
| • |
Settable power save auto off feature |
| • |
Backlight off option |
| • |
Low battery indicator |
|
|
| R420 Series Bench Scales
– Data Sheet |
|
| Specifications |
| Product |
XA-A |
| Capacity (kg) |
30kg (30 x 0.002kg)
60kg (60 x 0.005kg) |
| Pan Size (LxWxH) |
310mm x 310mm x 80mm |
| Materials |
6mm frame - 8mm plate |
| Frame |
Mild Steel - Coated |
| Pan |
304 Stainless Steel |
| Feet |
Glass Filled Nylon and Synthetic Rubber |
| Load cell |
Aluminium |
| IP Rating Base |
IP67 |
| Instrument |
R420 |
| Net Weight |
9.5kg |
| Repeatability |
+/- 1 division |
| Linearity |
+/- 1 division |
| Display |
LCD with 4 alpha-numeric displays and LED
backlighting:
Primary display: 6 x 28.4mm high digits with units and
annunciators
2nd display: 9 x 17.6 mm digits with units
3rd display: 8 x 6.1 mm digits
4th display: 4 x 7.6 mm digits |
| Keypad |
23 Silicon Keys |
| Power Source |
|
| DC |
12 to 24VDC (15 VA max) ON/OFF key with
memory feature |
| AC |
AC power supply
Input: 110/240VAC 50/60Hz
Output: 12VDC 15VA |
| Battery |
2.5AH NiMH rechargeable battery pack
Charger Input: 110/240VAC 50/60Hz
Output: 12VDC |
| Ambient Temp |
-10 - +40 °C |
| IP Rating Indicator |
IP65 |
| Data Output |
Serial 1A: RS-232 serial port for remote
display, network or printer supports.
Serial 1B: RS-485 transmit only for remote display
Transmission rate: 2400, 4800, 9600 or 19200 baud |
| Software |
K401 |
K402 |
K411 |
| |
Custom printing, custom unit switching,
counting, manual hold, peak hold, auto output and totalizing,
printing, auto output |
6 Material, Inflight and Jogging Correction, 3 Speed
Fill, Up to 10 Batching and Pulse stages |
| Set points |
|
8 |
| Analogue Output |
|
1 (Optional Module) |
| AdditionalCommunications |
|
Optional Modules
RS232/RS232
RS232/RS485
RS485/RS485 |
| Button Input |
|
4 Buttons (Optional Module) |
|
| 5100 Batch |
| Using one recipe, a hopper is filled to a bulk amount then
batched out into a mixer vessel to a target amount using auto
correction. The system is set to send an “end of batch”
signal to the PLC on batch” signal to the PLC on |
| The targets for the batch in (MAT1 material 1) and the batch
out (MAT2 material 2) are set through the front key pad or Viewer
software. The MAT1 target is a positive weight and is the bulk
fill of the hopper and MAT2 is a negative weight |
| as it is the actual batched out quantity. MAT2 should be lesser
value than MAT1 to avoid the batched out falling short. |
| An external start button is configured and a BATCH button
is set on the programmable function key on the indicator. The
cycle is set to automatically restart in this case but it can
be set as a single batch run only. When auto is used a BATCH
or PAUSE key is recommended to allow the batch process to be
halted. |
| Full batch printing can be used for this process please refer
to the reference manual for detailed information on the batch
printing. |
 |
 |
